Google Ads Conversion Lift Guide Adds Data Readiness Checks and a List of Unsupported Conversion Setups

Google Ads Conversion Lift Guide Adds Data Readiness Checks and a List of Unsupported Conversion Setups

Google AdsNovember 14, 2026
By Antonio Fernandez

TL;DR

  • Search Engine Roundtable reported on 13 November 2026 that Google edited its Conversion Lift setup help page; Google made no announcement and the page is undated.
  • The page now lists four setups Google Ads does not flag: Google Analytics web conversion imports, click-ID-only offline imports, multi-source conversions and custom variables on leads uploads.
  • Minimums are unchanged: at least 1,000 observed conversions and a campaign budget of $5,000 USD.
  • Google asks for 7 to 14 days of continuous conversion data before a study and 75% to 80% of web conversion traffic through Google tag gateway.
  • Basic consent mode is called insufficient when campaigns target EEA, UK and DMA regions.

Google has rewritten the measurement-readiness part of its Google Ads Help page "Set up Conversion Lift based on users". The page now has a section called "Data readiness for incrementality" with tables of specific checks, and a separate table of conversion setups that do not work in a lift study and that Google Ads does not flag. Search Engine Roundtable reported the edit on 13 November 2026 after comparing the live page with an archived copy. Google made no announcement and the page carries no date, so when the change went live is not known.

What changed on the Conversion Lift help page

The change is on the Google Ads Help article Set up Conversion Lift based on users. Search Engine Roundtable, the trade publication that spotted it on 13 November 2026, linked an Internet Archive capture of the older version for comparison. That capture is dated 12 October 2026.

Read side by side, the October capture had a short block headed "Ensuring data strength". It named four features to implement before launch: enhanced conversions, consent mode, advanced consent mode and Google tag gateway. It gave one paragraph for each and no thresholds. The current page moves the block into a new section called "Data readiness for incrementality", under the sub-heading "Ensuring data readiness", and follows it with several tables. Each row lists an issue, the condition Google checks, and the fix.

Search Engine Roundtable summarised the edit on 13 November 2026 as a strengthening of measurement requirements. In its reading, the guidance on study duration, budgets, conversion thresholds, holdout sizes, bidding strategies and campaign selection is largely unchanged.

What is new and what was already there

Relevant Audience covered this page on 9 October 2026, when it listed Search and Performance Max among the supported campaign types and stated the 1,000-conversion and US$5,000 minimums. None of that is new this time. The following table separates the two layers, based on the live page and the 12 October 2026 archive capture.

What is new and what was already there
TopicAlready on the pageNew in the current version
EligibilityAt least 1,000 observed conversions, a minimum campaign budget of $5,000 USD, and Display, Search, Video, Demand Gen, App and Performance Max campaignsNo change found
Readiness featuresA short list: enhanced conversions, consent mode, advanced consent mode, Google tag gatewayTables of specific checks, with advanced consent mode now labelled "only for EEA targeting campaigns"
Unsupported setupsNot listedFour setups that fail in a study and that Google Ads does not check or flag
Tag gatewayRecommended, no figureRouting less than 75% to 80% of web conversion traffic through it is described as a risk, with a 14% observed conversion uplift cited
Pre-study dataNot stated7 to 14 days of continuous conversion action data before launch

Search Engine Roundtable also noted on 13 November 2026 that supplementary conversions and the Demand Gen "Cooldown" feature were already in the archived version. The page dates Cooldown, which it also calls "Delayed Incremental Conversion", from 14 April 2026.

The four unsupported setups Google Ads does not flag

The most useful addition is a table headed "Unsupported conversion setups in Conversion Lift". The help page says Google Ads does not check or flag these issues, and the column header says they fail "even if diagnostics page shows 'Good'". An account can look healthy in conversion diagnostics and still feed a lift study with data it cannot use.

Google Analytics web conversion imports

The page states that web conversions imported from Google Analytics, including Google Analytics user-provided data, are not supported in user-based Conversion Lift. The recommended action is to use native Google Ads website conversion actions with enhanced conversions enabled.

Click-ID-only offline imports

Offline imports that carry only a click ID (GCLID, GBRAID or WBRAID) cannot be used. Google's stated reason is that the control group is not served an ad to click on, so there is no click ID to match for the people who were held back. The fix on the page is to upgrade offline imports to enhanced conversions for leads and pass hashed customer data.

Multi-source conversions

The page says Conversion Lift needs hashed customer data to measure holdout users and ignores extra identifiers such as IP address, device data or session attributes. It adds a specific warning: importing a BRAID together with customer data means Conversion Lift cannot use that customer data at all. The same table, in its click-ID row, tells advertisers not to import BRAIDs for actions they want to use in a study.

Custom variables on enhanced conversions for leads uploads

Custom conversion variables on these uploads are not supported and will not be processed. Google advises against relying on them to filter offline conversions in a lift study.

The data readiness checks, in plain terms

The checks are split by where an advertiser can see them. Some appear in Google Ads under Goals, then Conversions, Summary and Diagnostics. Others are labelled "custom" Conversion Lift checks and the page says they are unavailable in conversion tracking diagnostics.

Custom checks for web actions, which the Google Ads interface does not show:

  • Enhanced conversions is turned off for an eligible web conversion action.
  • Enhanced conversions is on, but the account-level customer data terms are not signed.
  • One conversion action receives both web and app conversions. The page says Conversion Lift drops all data when multiple sources are detected, and tells advertisers to create a separate conversion action for app conversions.

Checks for web tags that do appear in Diagnostics include a missing email (em) parameter on a large share of tag fires, phone numbers not in E.164 format before hashing, and address data missing any of the four required fields: first name, last name, postal code and country. The page also notes that relying only on automatic detection of customer data is supported, but that manual in-page code or an API delivers more.

For enhanced conversions sent by server or the Google Ads API, the page lists two thresholds. Hashed user-provided data present on less than 30% of API pings relative to tag conversions is flagged. So are conversions uploaded more than 24 hours after the event. Mismatched or missing transaction IDs between the tag and the API are flagged as well.

For leads, the custom checks are that enhanced conversions for leads is not enabled on an eligible offline action, and that offline conversions come in through a legacy API that only matches to clicks. The visible checks include no import with hashed data in the last 7 days, and a case where less than 1% of attempted imports contain customer data without a GCLID. Google reads that last pattern as a sign that conversions without a click ID are being filtered out before upload. It asks advertisers to import every offline event that has an email or phone number.

The app section has its own table and a note that these issues are not flagged in the Ads interface. It asks for matching Android and iOS conversion actions under the same goal, because Conversion Lift uses Android actions in that goal for iOS modeling. It also recommends selecting both web and app actions when setting up a web study.

The consent mode check on the page reads: "Basic consent mode is insufficient for Conversion Lift." The condition is specific. It applies when a web conversion action is not using advanced consent mode while campaigns target EEA, UK and DMA regions. In the feature list above the tables, advanced consent mode carries the label "only for EEA targeting campaigns".

The two lines do not match exactly. One says EEA, the other EEA, UK and DMA regions. The page does not reconcile them. The safer reading for an advertiser with European targeting is the wider one.

Best practices that come with numbers

A second new table, "Additional data readiness best practices", has four entries.

  • If a conversion action is set to "Don't use a value", passes zero or a static default, or lacks a valid currency code, Conversion Lift cannot report incremental conversion value or iROAS accurately. The page notes that Conversion Lift uses raw event values and does not apply Google Ads conversion value rules.
  • Always send email alongside phone number and address. The page says phone-only or single-identifier setups rarely reach the matching thresholds Conversion Lift requires.
  • All selected conversion actions should have been firing with valid enhanced conversions and consent mode for 7 to 14 days before launch.
  • Routing less than 75% to 80% of web conversion traffic through a first-party domain or CDN leaves tags exposed to browser and ad-blocker restrictions. The page cites a 14% observed conversion uplift with Google tag gateway and names Cloudflare, Akamai and Fastly as CDNs. It does not say how the 14% figure was measured.

What to check in your account before asking for a study

Conversion Lift is still not available to all accounts. The page tells advertisers to contact their Google account representative. Since four of the failure modes are ones Google Ads will not warn about, a manual review before that conversation is the reasonable step. This is analysis based on the page, not a procedure Google published in this order.

  1. List the conversion actions you would select for the study and note the source of each. Anything imported from Google Analytics is out, by the page's own wording.
  2. Check whether offline or CRM conversions are uploaded with click IDs only. If so, the upgrade path on the page is enhanced conversions for leads through the Data Manager API or the Data Manager page.
  3. Look for any single conversion action that collects both web and app events, and split it.
  4. Confirm enhanced conversions is on and the customer data terms are accepted under Goals, Conversions, Settings.
  5. Check that real transaction values and an ISO currency code are passed on every event if you plan to read iROAS. Value rules will not be applied.
  6. Open Goals, Conversions, Summary, Diagnostics for the checks that are visible, then remember that a "Good" status there does not cover the unsupported list.

Advertisers that report primary conversions from GA4 may find this the largest piece of work, because it means moving to native Google Ads tags for the actions being tested. A review of the GA4 setup next to the Google Ads conversion settings shows quickly which actions would have to change.

What this means for Thai advertisers

The help page does not name any country, and nothing in it is specific to Thailand. The points below are reasoning from what the page says.

First, the thresholds decide who this concerns. A study needs at least 1,000 observed conversions in the account and a minimum campaign budget of $5,000 USD, and access goes through a Google account representative. Smaller Thai accounts will not reach a study at all, though the tracking practices on the list are worth having for ordinary reporting.

Second, the unsupported list targets two setups that are simple to build and therefore common in lead generation: importing GA4 key events into Google Ads as conversions, and uploading CRM leads matched only by GCLID. A Thai business running either would have a study that silently loses those conversions.

Third, the phone number check matters for local data. E.164 format requires the country code, so a Thai mobile number has to be sent with +66 rather than a leading 0 before hashing. The page also says phone-only setups rarely reach the matching thresholds, which is relevant where lead forms collect a phone number and LINE ID but no email.

Fourth, the consent mode condition is written around EEA, UK and DMA targeting. A campaign aimed only at users in Thailand does not meet that condition as worded. Hotels, exporters and other Thai advertisers that target European users do.

What the page does not say

  • It gives no date for the edit. The only timing evidence is the 12 October 2026 archive capture and the 13 November 2026 report by Search Engine Roundtable.
  • It does not say whether studies already running are affected by the checks.
  • It no longer carries the earlier note that a study can be created and saved regardless of warning severity. Whether that behaviour changed is not stated.
  • It does not publish the matching thresholds it refers to, or the method behind the 14% tag gateway figure.
  • It does not say Conversion Lift is opening to more accounts.

Questions advertisers are asking about the Conversion Lift update

Did Google change the Conversion Lift minimums?

No, the minimums on the page are the same: at least 1,000 observed conversions and a minimum campaign budget of $5,000 USD. Conversions with supplementary data still do not count towards the 1,000. Search Engine Roundtable reported on 13 November 2026 that thresholds and budgets remain largely unchanged.

Can I run a Conversion Lift study on conversions imported from GA4?

No. The Google Ads Help page says web conversions imported from Google Analytics, including Google Analytics user-provided data, are not supported in user-based Conversion Lift. Google recommends native Google Ads website conversion actions with enhanced conversions enabled.

Why are GCLID-only offline conversions not usable?

Because the control group never sees an ad, so those users have no click ID to match. That is the reason the page gives. Offline conversions need hashed customer data, such as email or phone, uploaded through enhanced conversions for leads.

Will Google Ads warn me if my setup is unsupported?

Not for the four setups on the unsupported list. The page says Google Ads does not check or flag them and that they fail even when the diagnostics page shows "Good". Other issues, such as missing email parameters or late API uploads, do appear under Goals, Conversions, Summary, Diagnostics.

When did this change take effect?

The date is not stated. Google made no announcement and the help page is undated. Search Engine Roundtable reported the difference on 13 November 2026 against an archive capture from 12 October 2026, so the edit happened somewhere between those two dates.

The practical step now

For accounts large enough to qualify, the page turns study preparation into a tracking audit that should happen at least 7 to 14 days before launch, since that is the continuous data window Google asks for. Relevant Audience's Google Ads team can review conversion actions, offline imports and enhanced conversions against the new list before you raise a study with your Google representative.

Antonio Fernandez

Antonio Fernandez

Founder and CEO of Relevant Audience. With over 15 years of experience in digital marketing strategy, he leads teams across southeast Asia in delivering exceptional results for clients through performance-focused digital solutions.

Share to:
Copy link:

Read us often? Add Relevant Audience as a preferred source so our articles surface more in your Google results.