YouTube In-feed Video Ads Explained: Formerly Discovery Ads

YouTube In-feed Video Ads Explained (Formerly Discovery Ads)

Youtube AdsNovember 19, 2026
By Antonio Fernandez

TL;DR

  • In-feed video ads were formerly called YouTube Discovery ads and TrueView discovery ads. They show a thumbnail plus text in search results, related videos and the mobile home feed.
  • The viewer chooses to start the video by clicking the thumbnail, and in principle that click is what you pay for. Impressions nobody clicks are not billed under this model.
  • Do not confuse the format with the Discovery campaign type in Google Ads, which was replaced by Demand Gen. In-feed also runs in video campaigns.
  • Creative drives results: view rate depends on the thumbnail and headline. Test one variable at a time and confirm length limits and billing terms in the current Google Ads documentation.

YouTube in-feed video ads are video ads shown as a thumbnail with a few lines of text in the places where viewers are choosing what to watch: YouTube search results, the related videos list and the mobile home feed. The viewer clicks to start the video, which separates them from ads that play before or during a video. They used to be called YouTube Discovery ads and TrueView discovery ads, so anyone searching for "YouTube Discovery ads" is looking for this format.

What are YouTube in-feed video ads, and what were they called before?

The ad has two parts. The first is a thumbnail taken from a YouTube video. The second is a short block of text with a headline and description lines. The viewer sees both and decides whether to click, so the ad behaves more like a promoted search result than like a commercial break.

The naming causes real confusion. "Discovery" has been used for two different things. One is the YouTube video format, shown in search results and recommendations, which Google now calls in-feed video ads. The other is a Google Ads campaign type called Discovery, which ran image-based ads across Google feeds such as YouTube Home, Discover and Gmail. That campaign type has been upgraded to Demand Gen. When you read an older article about "Discovery ads", check which of the two it means, and check the names in your own Google Ads account, because Google changes names and options from time to time.

Where do in-feed video ads appear on YouTube?

According to Google's documentation, in-feed video ads appear where viewers are searching for or browsing videos: YouTube search results, the related video suggestions beside or below a watch page, and the home feed in the mobile app. Which placements you actually get depends on the campaign type and its settings, so open the campaign settings in your account and read the placement list before planning around any of them.

The practical effect is that your ad competes with ordinary videos sitting next to it. A thumbnail that looks like an ad loses to one that makes the viewer curious. In search results the headline also matters a great deal, because the viewer is already looking for something specific and your text either matches it or does not.

How do in-feed ads differ from in-stream, bumper and Shorts ads?

The main difference is who decides to start watching. With in-feed, the viewer chooses. With in-stream, the ad is inserted before or during a video the viewer already chose. Ads in Shorts sit inside the vertical video feed that viewers swipe through. The table summarises the mechanics and is not a ranking.

How do in-feed ads differ from in-stream, bumper and Shorts ads?
FormatWhere it appears and how it startsHow it is usually charged
In-feed video adsSearch results, related videos and home feed; the viewer clicks the thumbnail to startPer click to watch (check the current terms in your account)
Skippable in-streamBefore, during or after a video; skippable after a few secondsWhen a watch-time threshold or an interaction is reached (check the latest terms)
BumperShort non-skippable video before or during a videoGenerally per impression
Shorts adsInserted in the vertical Shorts feedDepends on campaign type and goal; check your account

Google adjusts how each format is counted and billed from time to time, so treat the table as an overview of the mechanics and confirm the numbers and conditions in the current Google Ads documentation before you set a budget.

How are in-feed ads charged, and when does a view count?

In principle, you are charged when a viewer clicks the thumbnail to watch the video. An impression that nobody clicks is not billed under this model, which differs from in-stream formats where billing depends on watch time or interaction. The result is that your cost per view (CPV) depends on two things: the price you set, and the share of people who click the thumbnail after seeing the ad.

A worked example, with illustrative numbers that do not describe any real account: if an ad is shown 10,000 times and 150 people click to watch, the view rate is 1.5%. If a better thumbnail and headline bring 250 views from the same number of impressions, the view rate rises to 2.5%. The extra viewers came from the creative alone, with no change in budget. That is why creative is the main lever for this format.

Keep views separate from business results. A view means someone started the video. It does not mean they finished it, contacted you or bought, so those need their own measurement.

What are the thumbnail, headline and description specs?

An ad has a thumbnail, a headline and two description lines. The length limits that Google Ads documentation has listed are about 100 characters for the headline and about 35 characters for each description line, but limits change, so confirm them against the character counters in the ad creation screen.

  • Thumbnail. It comes from the YouTube video you pick. You can usually choose between frames the system generates or a thumbnail you uploaded for that video; check the options in the ad creation screen. It should still read at small size on a phone, with a clear face or object and no more than a few words of text on the image.
  • Headline. State the benefit or the answer the video gives, not your company name. Cut the lead-in, since text can be truncated on small screens, and put the main point first.
  • Description. Two short lines that add what the headline did not say, such as who the video is for or what it covers. Do not repeat the headline.
  • Source video. It has to be on YouTube and set up so it can be used in ads. Check its sharing status before you build the ad.

Which campaign types can run in-feed video ads?

In-feed video ads run in Google Ads video campaigns (whose goal option was historically called Video views) and are part of the YouTube inventory that Demand Gen campaigns use. Demand Gen is the campaign type that replaced the old Discovery campaign. It uses image and video creative to reach people across YouTube, Discover and Gmail from one setup. RA has a separate explainer on Demand Gen on its blog, so read that for the details. The campaign types you see depend on the goal you choose and your Google Ads version, so check the campaign creation screen.

A simple way to choose: if the goal is for people to choose to watch a video and you mainly want to control delivery on YouTube, start with a video campaign. If you want to reach people across several Google surfaces at once and have several creative versions, look at Demand Gen.

Which goals suit in-feed video ads?

The format fits when viewers want something and your video delivers it: a how-to, a product comparison, a review or an explanation of a complicated service. People searching on YouTube already intend to watch, so in-feed matches the research stage of a decision. If the goal is to get a brand name in front of many people quickly, bumper or in-stream usually fits better because nobody has to click first.

It fits poorly when the video is a hard-sell ad that gives viewers no reason to click. You will see a low view rate and a high cost per view. In that case, rework the video so it informs first, or use another format.

How do you measure results and improve thumbnails and headlines?

Track three groups of metrics. The first is the click decision: impressions, views and view rate. The second is cost: cost per view. The third is the quality of the viewing: average watch time and the share who watch to the end. Business results come last, such as clicks to your site, sign-ups or enquiries, and the tracking for those must be set up first.

  1. Change one variable at a time. Build two ads with the same video that differ only in the thumbnail or only in the headline.
  2. Run both in the same ad group and audience so conditions stay close.
  3. Wait for enough data. A verdict from a few dozen views often reverses as the data grows.
  4. Compare view rate first, then viewing quality. A thumbnail that attracts clicks but loses viewers immediately has not won.
  5. Keep the winner as the baseline and test the next variable.

Add tracking parameters such as UTM tags to the destination link, and connect measurement to Google Analytics 4 or Google Ads conversion tracking, so you can see whether views lead to real actions.

What this means in the Thai market

Much YouTube searching and viewing in Thailand happens on phones, so design the thumbnail and headline for a small screen first, and check the real preview on a phone before launch. Thai text on a thumbnail needs a heavy, legible font, and it should not be so small that tone marks and vowels above and below the line disappear when the image is shrunk.

Thai viewers often search in a mix of Thai and English, for example an English product or tool name inside a Thai sentence. Write headlines with the words people actually type, in both languages. Old names such as "Discovery ads" are still searched, so explain them on the supporting page or in the video. Thai has no spaces between words, which is another reason to put the key point at the start in case text is shortened. If you want a team to plan and run YouTube advertising, see RA's YouTube Ads service.

YouTube in-feed video ads FAQ

Are YouTube Discovery ads and in-feed video ads the same thing?

The YouTube video format is the same thing: Discovery ads and TrueView discovery are its old names. The Discovery campaign type in Google Ads is a different thing that has been replaced by Demand Gen.

When are in-feed ads charged?

In principle you are charged when a viewer clicks the thumbnail to watch the video, not when the ad is merely shown. Confirm the current terms in the documentation and in your Google Ads account before setting a budget.

How long should the video be?

There is no fixed required length for in-feed, because the viewer chooses to start it. What matters more is that the opening of the video answers what the thumbnail and headline promised, or viewers leave at once.

Should I test the thumbnail or the headline first?

Test one at a time, but the thumbnail usually has the biggest effect on view rate because it is the first thing a viewer sees. Judge by your own results and do not rely on average figures quoted from elsewhere.

Can I measure sales with in-feed ads?

Yes, if conversion tracking is set up correctly, but a view is not a sale. Tie the destination link and the goals in Google Ads or GA4 together so you can see which action a view leads to.

If you want specialists to set up the account structure and creative, see RA's YouTube advertising service or Google Ads service. For help producing the visuals or video, see graphic design and AI video and photo production.

Antonio Fernandez

Antonio Fernandez

Founder and CEO of Relevant Audience. With over 15 years of experience in digital marketing strategy, he leads teams across southeast Asia in delivering exceptional results for clients through performance-focused digital solutions.

Share to:
Copy link:

Read us often? Add Relevant Audience as a preferred source so our articles surface more in your Google results.