Google Ads Ad Rank: how it works and how to improve it without raising bids

Google Ads Ad Rank: how it works and how to improve it without raising bids

Google AdsNovember 16, 2026
By Antonio Fernandez

TL;DR

  • Google lists six Ad Rank factors: bid, ad and landing page quality, Ad Rank thresholds, auction competitiveness, search context, and the expected impact of assets and other ad formats.
  • Quality Score is a 1 to 10 keyword-level diagnostic built from expected clickthrough rate, ad relevance and landing page experience; Google says it is not an input in the auction.
  • Actual CPC is the minimum needed to clear the Ad Rank thresholds and beat the advertiser immediately below; with no eligible advertiser below, the reserve price applies.
  • Thresholds are set at auction time and rise for lower quality ads and higher positions; they also vary by location, device and the topic of the search.
  • Search lost IS (rank) is the percentage of time ads did not show on the Search Network due to poor Ad Rank; Search lost IS (budget) is available at campaign level only.

Google Ads Ad Rank is the set of values Google uses to decide whether your ad is eligible to show in an auction and where it appears relative to other advertisers' ads. It is worked out in each auction from your bid, the quality of your ad and landing page at that moment, the Ad Rank thresholds, the competitiveness of the auction, the context of the search, and the expected impact of your assets and other ad formats. A higher bid helps, but it is one input among six, which is why an advertiser with a lower bid can appear above one with a higher bid.

This guide explains each input, how google ads ad rank decides position and the price of a click, why an ad can fail to show at all, and what you can change without spending more per click. It is written for people who manage their own account or who review the work of a Google Ads management team.

What Ad Rank is and what goes into it

Google Ads Help lists six factors that make up Ad Rank. None of them is fixed for a keyword. They are assessed again in every auction, so the same ad can have a different Ad Rank on two searches a minute apart.

  • Your bid. The most you are willing to pay for a click. You often pay less than this amount.
  • Ad and landing page quality. Google assesses how relevant and useful the ad and the page behind it are to the person searching. The assessment used in the auction is made at auction time.
  • Ad Rank thresholds. Minimum values an ad must reach before it can show in a given position.
  • Competitiveness of the auction. When two ads have similar Ad Ranks, each has a similar chance of winning the position. As the gap widens, the higher-ranked ad is more likely to win and may also pay more per click for that certainty.
  • Context of the search. The search terms, the person's location at the time, the device, the time of the search, the nature of the search terms, the other ads and results on the page, and other user signals.
  • Expected impact of assets and other ad formats. Google estimates how additions such as a phone number or extra sitelinks will affect the performance of the ad.

Many older guides state the calculation as "Ad Rank = maximum CPC x Quality Score". That is an old simplification from an earlier version of the system. Google's current help pages do not publish a formula, and they describe more inputs than those two. Treat the old equation as a way to remember that bid and quality both count, and nothing more precise than that.

Ad Rank vs Quality Score: how they differ

Ad Rank and Quality Score are related, and they are often confused. Ad Rank is computed in the auction and decides what happens to your ad. Quality Score is a number shown in your account to help you diagnose quality. Google states that Quality Score is a diagnostic tool and is not an input in the ad auction.

Ad Rank vs Quality Score: how they differ
AspectAd RankQuality Score
What it isValues calculated in each auction that decide eligibility and positionA diagnostic score from 1 to 10 shown at keyword level
When it is calculatedAt auction time, for every auction the ad entersFrom historical impressions for exact searches of the keyword over the last 90 days
What goes inBid, auction-time ad quality, thresholds, competitiveness, search context, expected impact of assetsThree components: expected clickthrough rate, ad relevance, landing page experience
Used in the auctionYesNo. Google describes it as a diagnostic tool only

Each Quality Score component is given a status of "Above average", "Average" or "Below average", based on a comparison with other advertisers whose ads showed for the exact same search. Google also notes that Quality Score does not capture everything that affects ad quality in a live auction, such as the device, the person's location, the time of day and assets. So a keyword with a Quality Score of 8 can still lose an auction on a particular phone, in a particular city, for a particular wording of the search. Use the score to find weak ad groups, and do not treat it as a prediction of any single auction.

How Ad Rank sets ad position and actual CPC

Ad Rank decides two things at once. Ads are ordered by Ad Rank, and the price of a click is derived from the Ad Ranks around you. Google describes the actual cost per click as the minimum needed to clear the Ad Rank thresholds and beat the Ad Rank of the advertiser immediately below you. You pay just enough to hold your position, rounded up to the smallest billable unit of your currency.

Two details in that definition matter in practice. If no eligible advertiser sits below you, the click is still not free. You pay the reserve price, which Google defines as your threshold rounded up to the minimum billable unit. And thresholds are typically higher for ads above the search results than for ads below them, so a click from a top position can cost more even when no competitor is directly beneath you.

Here is an illustrative example. The numbers are invented to show the logic and are not real Ad Rank values. Suppose four advertisers enter an auction with Ad Ranks of 60, 45, 20 and 6. Suppose the threshold for showing above the search results is 40 and the threshold for showing below them is 8.

  • The advertisers at 60 and 45 clear the upper threshold and show above the results. The first pays just enough to beat 45. The second pays just enough to clear the threshold of 40, because the next advertiser, at 20, is below that threshold.
  • The advertiser at 20 clears the lower threshold and shows below the results, paying just enough to clear 8.
  • The advertiser at 6 is under every threshold and does not show.

Because quality is inside Ad Rank, a better ad and landing page reach the same Ad Rank with a lower bid. That is the mechanism behind Google's statement that higher quality ads typically lead to lower costs. Google also notes that you are generally not charged more than your maximum CPC bid, with exceptions when automated bidding or bid adjustments are in use.

Ad Rank thresholds and why an ad does not show

An ad that never appears for a keyword may be failing a threshold rather than losing to a rival. Thresholds are set dynamically at the time of each auction. Google lists these influences on them:

  • Ad quality. Lower quality ads face higher thresholds.
  • Ad position. Positions higher on the page carry higher thresholds than positions lower down.
  • User signals and attributes. Thresholds can vary with the person's location, including by country, and with the device.
  • Topic and nature of the search. Thresholds differ according to the search terms. Google's own example contrasts searches about weddings with searches about basket-weaving classes.

This can explain several things that look like faults in an account. A keyword can show ads on desktop and almost never on mobile. A campaign can appear below the results all day and rarely at the top. An ad can be eligible in one country and absent in another with the same bid. In each case the ad's Ad Rank may be facing a different minimum.

When an ad does not show, check in this order: the keyword and ad are approved and enabled, the budget is not exhausted, the bid is not far below what the auction needs, and the quality components are not "Below average". Raising the bid fixes only one of those four.

How to improve Ad Rank without raising bids

Five of the six Ad Rank inputs are not your bid. Thresholds, competitiveness and context are outside your control, which leaves quality and assets as the levers that cost nothing per click.

  1. Raise expected clickthrough rate. Write headlines that repeat the idea of the search and state a concrete offer. Split ad groups that mix different intents, so each ad speaks to one kind of search.
  2. Tighten ad relevance. If a keyword's ad relevance is "Below average", the ad text is too general for it. Move the keyword to an ad group whose ads are about that subject, or write ads for it.
  3. Fix landing page experience. Send each ad group to the page that answers the search, not to the home page. The page should load quickly on a phone, show the promised product or service first, and make the next step obvious. A dedicated landing page design is often the cleanest way to do this for high-spend ad groups.
  4. Add every relevant asset. Sitelinks, callouts, structured snippets, call assets and image assets are among the asset types Google Ads Help lists, and it advises using all the assets relevant to your business goals. Ad Rank factors in their expected impact.

Work through the keywords with the most spend first, and read the three Quality Score components as a to-do list. The site has separate guides on Quality Score and on impression share, so this page stays with how they connect to Ad Rank.

Ad Rank under Smart Bidding

Smart Bidding changes who sets the bid, but Ad Rank still applies. With Target CPA, Target ROAS, Maximize conversions or Maximize conversion value, Google sets a bid for each individual auction using signals such as device, location, time of day, language and the search query. Google calls this auction-time bidding. That bid then enters the same auction, and the ad is still ranked on Ad Rank with quality, thresholds and assets counted as before.

In practice, your control moves from keyword bids to the target and the data: the bid in each auction depends on how likely a conversion looks and on the target you set. Google's help page on Target CPA bidding says a target set too low may cause you to forgo clicks that could result in conversions. And the bidding system can only value auctions correctly if conversions are measured correctly. A missing or duplicated conversion tag distorts every bid. If the tracking has not been checked since the property was set up, a review of the GA4 and conversion setup comes before any change to targets.

Quality work still pays under Smart Bidding. A more relevant ad and a better page reach a given Ad Rank at a lower bid, which lets the same target win more auctions.

Reading impression share lost to rank

The account view closest to Ad Rank is impression share. Google defines Search lost IS (rank) as the percentage of time your ads were not shown on the Search Network due to poor Ad Rank in the auction. Its counterpart, Search lost IS (budget), is the percentage of time ads were not shown because of insufficient budget, and that one is available at campaign level only.

To read it, open Campaigns, Ad groups or Keywords, choose the columns icon, and add the impression share columns. Then read the two "lost" columns together:

  • High lost IS (rank), low lost IS (budget). The budget is sufficient and Ad Rank is the limit. Work on quality and assets first, then bids or targets.
  • Low lost IS (rank), high lost IS (budget). Ad Rank is fine and the campaign runs out of money. Raising bids here makes the problem worse.
  • Both high. Narrow the campaign to the keywords and locations that convert before adding spend.

Two notes on the data. Google states that lost IS (rank) is not shown on the Ad groups tab if the campaign ran out of budget at any point in the date range. And impression share is an estimate of the auctions you were eligible for, so read it as a direction over weeks, not as an exact count for one day.

What this means in the Thai market

For advertisers in Thailand the mechanics are identical, and Google's own description of thresholds explains why local detail matters. Thresholds can vary by country and by device, so a bid and ad that perform in one market do not carry over unchanged to another. Check performance by device before judging a keyword, and build the landing page for a phone first.

Language is the other local factor. A Thai search matched to an English ad and an English page is a relevance problem that no bid repairs cleanly. Keep Thai and English keywords in separate ad groups or campaigns, write ads in the language of the search, and send each to a page in that language. Prices in baht, delivery areas and contact options stated on the page in Thai all support landing page experience.

Frequently asked questions about Ad Rank

Is Ad Rank the same as ad position?

No, Ad Rank is the value used to decide the order of ads, and ad position is the result of that ordering. Two advertisers can swap positions from one search to the next because Ad Rank is calculated again in every auction.

Does the highest bid always get the top position?

No, the highest bid does not always get the top position, because bid is only one of six Ad Rank factors. An ad with better auction-time quality and stronger assets can outrank an ad with a higher bid.

Does Quality Score affect Ad Rank?

Quality Score itself is not an input to Ad Rank. Google describes it as a diagnostic tool, and the quality assessment used in the auction is made at auction time with signals the 1 to 10 score does not capture, such as device and location.

Why is my ad not showing even with a high bid?

One Ad Rank reason is that the ad does not meet the thresholds Google says an ad must achieve to show. Thresholds rise for lower quality ads and for higher positions, so check the Quality Score components and the Search lost IS (rank) column before raising the bid again.

Can I improve Ad Rank under Smart Bidding?

Yes, quality and assets still count under Smart Bidding because the system only replaces the manual bid. Better ad relevance, landing pages and assets raise Ad Rank at any bid, and accurate conversion tracking lets the system bid correctly in each auction.

Ad Rank counts relevance as well as the bid, so it is worth checking quality before spending more per click. If you would like a second opinion on where an account is losing auctions, the Google Ads service page explains how Relevant Audience works with search campaigns.

Antonio Fernandez

Antonio Fernandez

Founder and CEO of Relevant Audience. With over 15 years of experience in digital marketing strategy, he leads teams across southeast Asia in delivering exceptional results for clients through performance-focused digital solutions.

Share to:
Copy link:

Read us often? Add Relevant Audience as a preferred source so our articles surface more in your Google results.